Production method of H-beam
Release time:
2024-07-06
H-beams can be produced by welding or rolling. Welded H-beam is to cut strip of suitable thickness to suitable width, and weld the flange and web together on a continuous welding unit. Welded H-beam has the disadvantages of large metal consumption, difficult to ensure uniform product performance, and limited size specifications.
H-beams can be produced by welding or rolling. Welded H-beam is to cut strip of suitable thickness to suitable width, and weld the flange and web together on a continuous welding unit. Welded H-beam has the disadvantages of large metal consumption, difficult to ensure uniform product performance, and limited size specifications. Therefore, H-beams are mainly produced by rolling method. In modern steel rolling production, H-beams are rolled using universal rolling mills. The web of the H-beam is rolled between the upper and lower horizontal rolls, and the flanges are rolled and formed simultaneously between the side of the horizontal roll and the vertical roll. Since only the universal rolling mill cannot press down the flange edge, it is necessary to set an edge rolling machine behind the universal stand, commonly known as the edge rolling machine, in order to press down the flange edge and control the flange width. . In the actual rolling operation, the two stands are used as a group, and the rolling stock is passed through several times, or the rolling stock is passed through a continuous rolling consisting of several universal stands and one or two edger stands. The unit applies a certain amount of reduction in each pass to roll the billet into a product of the required shape and size. At the flange part of the rolling piece, due to the sliding between the side of the horizontal roll and the rolling piece, the wear of the roll is relatively large. In order to ensure that the rolls can be restored to their original shape after heavy rolling, the sides of the upper and lower horizontal rolls of the roughing mill and the surfaces of the corresponding vertical rolls should be inclined at an angle of 3° to 8°. In order to correct the inclination angle of the finished flange, a finished universal rolling mill, also known as a universal finishing mill, is set up. The side of the horizontal roll is perpendicular to the axis of the horizontal roll or has a small inclination angle, generally not more than 20′, and the vertical roll is cylindrical.
Latest News
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
2025-12-18
What are the benefits of carbon steel plate？
The use of pressure vessels is very wide. It is an equipment that plays an important role in various sectors of the national economy such as the petrochemical industry, energy industry, scientific research and military industry.
2025-10-10
Manufacturing process of round tube
According to the production method, it can be divided into seamless round pipes and welded round pipes.
2025-07-12
What are the properties of stainless steel plates?
The stainless steel plate has a general corrosion resistance similar to that of the unstable ni-Cr 304. Prolonged heating in the temperature range at chromium carbide levels may affect alloys 321 and 347 in harsh corrosive media. Mainly used in high temperature applications, which require strong resistance to sensitization of materials to prevent intergranular corrosion at lower temperatures.
2025-06-20
Material :304 stainless steel belt, 304L stainless steel belt, 303 stainless steel belt, 302 stainless steel belt, 301 stainless steel belt, 430 stainless steel belt
2025-04-18
Galvanized Steel: Types, Uses, Benefits.
Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.
2024-12-14
CONTACT US
Add : Building 3, Xinlian Tiandi 176 Jufeng Road Licang District Qingdao City, Shandong Province, China
GET A FREE QUOTE
Copyright : Qingdao Senxuanyao Steel Group Co., Ltd.