Typical production process flow for coated panels
Release time:
2024-10-25
The whole unit includes the following four parts: the inlet section, the pretreatment section, the coating section, and the outlet section. The common process flow of the two-coating and two-bake color coating production line is: unwinding→stitching→inlet looper→cleaning→pretreatment→preliminary (fine) coating→preliminary (fine) curing→cooling→exit looper→cutting→rolling Pick.
The whole unit includes the following four parts: the inlet section, the pretreatment section, the coating section, and the outlet section. The common process flow of the two-coating and two-bake color coating production line is: unwinding→stitching→inlet looper→cleaning→pretreatment→preliminary (fine) coating→preliminary (fine) curing→cooling→exit looper→cutting→rolling Pick.
Entrance section: including uncoiling, trimming, seaming, and material storage loops, etc., the function is to loosen the raw material coils and connect them, so as to continuously and uniformly supply metal sheets to the unit.
Pretreatment section: Clean the coated bottom plate and carry out surface treatment to improve corrosion resistance and adhesion to the upper paint film.
Coating section: It is the core part of the whole unit. Usually, the two-coating and two-baking process is used to coat both sides at the same time, that is, primer (primary coating) → baking and curing → cooling → topcoat (finish coating) → Bake and solidify → cool. Depending on the requirements of the product, it can also be used for one coating and one baking or only one side. When painting, it can be applied in reverse or along the roller. The furnace temperature is controlled in sections, and the temperature of each section depends on the type of coating used, the thickness of the bottom plate and the time passing through the oven.
Exit section: the product is divided into rolls (or cut into single sheets according to the required size).
Latest News
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
2025-12-18
What are the benefits of carbon steel plate？
The use of pressure vessels is very wide. It is an equipment that plays an important role in various sectors of the national economy such as the petrochemical industry, energy industry, scientific research and military industry.
2025-10-10
Manufacturing process of round tube
According to the production method, it can be divided into seamless round pipes and welded round pipes.
2025-07-12
What are the properties of stainless steel plates?
The stainless steel plate has a general corrosion resistance similar to that of the unstable ni-Cr 304. Prolonged heating in the temperature range at chromium carbide levels may affect alloys 321 and 347 in harsh corrosive media. Mainly used in high temperature applications, which require strong resistance to sensitization of materials to prevent intergranular corrosion at lower temperatures.
2025-06-20
Material :304 stainless steel belt, 304L stainless steel belt, 303 stainless steel belt, 302 stainless steel belt, 301 stainless steel belt, 430 stainless steel belt
2025-04-18
Galvanized Steel: Types, Uses, Benefits.
Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.
2024-12-14
CONTACT US
Add : Building 3, Xinlian Tiandi 176 Jufeng Road Licang District Qingdao City, Shandong Province, China
GET A FREE QUOTE
Copyright : Qingdao Senxuanyao Steel Group Co., Ltd.